Network Management

Location: Index > English Version > Products Center > Media Converter > Network Management >
  • E1 to V.35 Protocol Converter

    E1 to V.35 Protocol Converter

    Modle:

    ◆ Provides conversion between ITU-T G.703 standard E1 interface and V.35 interface ◆ Having pseudo random code test function ◆ E1 support N*64k rates, rate from 64k to 2048k. ◆ Based on self –copyright IC ◆ Support 120Ω/balance and 75Ω/unbalance impedance ◆ V.35 support hot plug and play, can connect with DTE or DCE ◆ LED indicator can monitor the remote device from local device

     

    View Detail

  • E1 to LAN Protocol Converter

    E1 to LAN Protocol Converter

    Modle: OLINK CON02T

    ◆ Provides conversion from ITU-T G.703 E1 interface to 10/100Base-T Ethernet interface ◆ Ethernet interface supports half/full duplex auto negotiation, support VLAN ◆ E1 support N*64k (N=1-32)rates or full 2M ◆ Based on self –copyr...

     

    View Detail

  • 4E1 to LAN Protocol  Converter

    4E1 to LAN Protocol Converter

    Modle: OLINK CON02T

    ◆ Provides conversion from 1--4 E1 channels to 10/100Base-T Ethernet interface ◆ Ethernet transmit transparent through 1-4 E1 channels ◆ Ethernet interface supports half/full duplex auto negotiation, support VLAN ◆ 4 E1 can have 10 ms trans...

     

    View Detail

  • 16 E1 PDH Multiplexer

    16 E1 PDH Multiplexer

    Modle: OLINK480-LM

    ◆ Multiplex 16E1 into one fiber channel to transmit ◆ Offer 1 optional 10/100Mbps Ethernet channel ◆ RS232 asynchronous interface, for management ◆ Complete alarm function and state indicator ◆ Support the local/remote E1 loop back ◆ E1 Line code: HDB3, compliant to G.703, G.823 and G.742 ◆ E1 channel support both 75ohm & 120ohm impedance

     

    View Detail

  • 8E1 PDH Multiplexer

    8E1 PDH Multiplexer

    Modle: OLINK240-LM

    ◆ Multiplex 8E1 into one fiber channel to transmit ◆ Offer 1 optional 10/100Mbps Ethernet channel ◆ RS232 asynchronous interface, for management ◆ Complete alarm function and state indicator ◆ Support the local/remote E1 loop back ◆ E1 Line code: HDB3, compliant to G.703, G.823 and G.742 ◆ E1 channel support both 75ohm & 120ohm impedance

     

    View Detail