ND-WB1-2403D 2.4G 300Mbps Outdoor CPE

Location: Index > English Version > Products Center > Wireless Bridge > 2.4G 300Mbps Wireless Bridge >
ND3104 4Port SDI Distribution Amplifier
Title: ND-WB1-2403D 2.4G 300Mbps Outdoor CPE
Modle: ND-WB1-2403D
Size:
Description: ND-WB1-2403D is an 2 4GHz 300Mbps high power outdoor CPE AP with LED display to show and configure it Channel, IP address and Signal Strength Comply with IEEE 802 11b g n standard, adopt Qualcomm QCA9531chipset, 14dBi dual polarized high gain antenna, 1000mW 30dBm high power, the transmit receive wireless distance more than 3500 meters
Specification:
Hardware:
Model ND-WB1-2403D
Chipset Qualcomm 9531
Wireless 802.11N, 2T2R  300M  MIMO Technology
Memory 64MB DDR2 RAM (128MB available by extra cost)
Flash 16MB
Interface 2 *10/100Mbps RJ45 Port, support 12~24V PoE
1 * Reset Button
1 * DC Injector, 12V/1A
1 * LED display
1 * F(Function) switch button
1 * S(Select) button,  press it to setup WDS PTP/PTMP connection
Antenna 14dBi Panel Antenna
LED Light POWER  Wi-Fi WAN LAN  
Size 260mm * 85mm * 45mm
Power 12V(POE 24V)/1A;110V/220V
RF Data
RF Data 802.11b/g/n:
2.312GHz to 2.4835GHz
Korea, Japan, ETSI, FCC, Debug
Modulation OFDM = BPSK,QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Data Rate 300Mbps
Receive Sensitivity 802.11n: -70dBm@MCS7,   -88dBm@MCS0.
802.11g: -72dBm@54Mbps, -90dBm@6Mbps.
802.11b: -85dBm@11Mbps, -94dBm@1Mbps.
RF Output Power 802.11n: @MCS7:26±2dBm,    @MCS0:28±2dBm.
802.11g: @54M:27±2dBm,     @6M:29±2dBm.
802.11b: @11M:28±2dBm,     @1M:30±2dBm
EVM 802.11n: ≤-28 DB
802.11g: ≤-25 DB
802.11b: ≤-10 DB
PPM ±20ppm
End User 64
Firmware
Operation Mode Wireless AP, Gateway, WISP, Wireless Bridge, WDS
Protocol/Standard IEEE 802.3(Ethernet)
IEEE 802.3u(Fast Ethernet)
IEEE 802.11b/g/n(2.4G WLAN)
Wireless Auto-Channel selection
Distance Control (802.1x Ack timeout)
BSSID
Security WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
Hide SSID
System Setting Web-based configuration (HTTP/Telnet)
Firmware upgrade Upgrade firmware via web browser or TFTP
Administration Admin Password can be configured
System monitoring Status in hand , useful statistic and Event log
Log Supports local logs, logs host, logs file export
Reset Reset or factory defaults
Backup Restore settings & configuration of the device to local file
Physical Property:
 
 
Temperature
Working: -40°C~55°C
Storage: -40°C to 70°C
Humidity 5%~95% (typical)
Package:
CPE830D unit
PoE Adapter
User Manual
LAN Cable
Setting Accessory
 
  • Comply with 802.11N, 2T2R  300M  MIMO Technology
  • 2 * 10/100 Mbps RJ45 Port, support 12~24VPoE
  • support Wireless AP, Gateway, WISP, Wireless Bridge,WDS
  • 14dBi Panel Antenna
  • support passive PoE
  • support special frequency from 2.312GHz to 2.4835GHz, total 27 channels
  • Supports local logs, logs host, logs file export
Connection Diagram is waiting for the update...
Part No Description of product Unit
ND-WB1-2403D 300Mbps Outdoor CPE,Comply with IEEE 802.11n standard, 2T2R  300M  MIMO Technology, 2.312GHz to 2.4835GHz, total 27 channels,1*10/100Mbps WAN Port,1*10/100Mbps LAN Port,WAN Port support passive 12~24V PoE ,build in 14dBi panel antenna,the Wi-Fi rang to up to 3500 meters,it works in pairs for point to point connection pc

Download List



  • No download.